13x6 Lace Front Wigs: When the Extra Two Inches Are Worth It
A 13x6 lace front has the same ear-to-ear width as a 13x4, with two more inches of parting room. Who needs that depth, what it changes in styling, and what to check before buying.
Bulqq is reader-supported: when you buy through a link on this page we may earn a commission, at no extra cost to you. It never changes what we recommend — the product rows here are pulled from live listings, newest first.
On a product page, the difference between a 13x4 and a 13x6 lace front looks tiny: one digit. On your head, it decides how far back you can part your hair, how a side-swept style sits, and how natural your hairline looks when the wind catches it.
A 13x6 isn't automatically "better" than a 13x4. It's more lace, more flexibility and usually a little more money. This guide explains exactly what those two extra inches change, who they matter for, and what to look for in a 13x6 listing.
What 13x6 means
Like a 13x4, a 13x6 has a lace panel that runs about 13 inches across the front, roughly ear to ear. The difference is depth: the lace reaches about 6 inches back from the hairline instead of 4.
Behind the lace, the cap is usually wefted. So on a 13x4, anything you do more than four inches back from your hairline is on wefts; on a 13x6, you have six inches of lace before that happens.
These sizes are nominal and aren't standardised across manufacturers, so compare within a retailer where you can. Our lace sizes guide shows 13x4 and 13x6 to scale side by side.
What the extra depth changes
Deep side parts
This is the main reason to buy a 13x6. A dramatic side part that starts above the arch of your eyebrow and runs back toward the crown can run off the end of 13x4 lace — the parting suddenly shows wefts. On a 13x6 it stays on lace for longer, so the part looks like scalp all the way back.
A wider, more natural parting space
Even with a middle part, the extra depth means the parting looks like scalp further back. That matters most when you look down, or when someone taller is looking at the top of your head.
More hairline movement
Flipping the hair from one side to the other, wearing a zig-zag part, or switching between middle and side across the week are all easier with more lace to work with.
Slicked-back styles
With six inches of lace, a slicked-back front shows more natural "scalp" before the hair meets the wefted part of the cap.
What it doesn't change
- High ponytails. The back of a 13x6 is still wefted. For a high ponytail you need a 360 lace or full lace cap.
- Width. Ear-to-ear is ear-to-ear on both.
- How easy it is to fit. A 13x6 is the same fitting job as a 13x4. The lace you lay along the hairline is the same length; the extra lace sits behind it under the hair.
Who should choose 13x6 over 13x4
Choose a 13x6 if:
- You wear a deep side part most of the time.
- You switch parts often and want each one to look natural.
- You're taller than most people around you — or often photographed from above — so the top of your head is on show.
- You like voluminous, high-density styles where the hair is lifted at the root and the parting is visible.
A 13x4 is enough if:
- You wear a middle part or a modest side part.
- You usually have hair falling over the parting — curtain bangs, a fringe, curls.
- You're on a tighter budget and want the money to go on length or HD lace instead.
The price difference
Usually smaller than people expect. On our comparison page, the median 13x6 lace front starts only a little above the median 13x4. Individual listings vary, so compare the 13x4 and 13x6 versions of the same wig from the same retailer — many listings let you choose either in a dropdown.
What to check on a 13x6 listing
Is it really 13x6 all the way?
Some listings say "13x6" in the title but describe a smaller lace area in the details, or use "13x6" for a lace front with a deeper parting strip only in the middle (sometimes called a "T-part" or "middle part 13x6"). Read the specification, and look at the photo of the inside of the cap if the retailer provides one.
Lace type
There's more lace on show with a deep part, so lace quality matters. HD lace looks most convincing on deep parts in close-up; transparent lace is sturdier. See HD vs transparent lace.
Pre-plucked parting, not just pre-plucked hairline
On a 13x6, the parting area is as visible as the hairline. Some retailers pluck the parting as well; check the photos for a natural, slightly irregular part rather than a dense straight line.
Bleached knots
The deeper the parting, the more knots show along it. Bleached knots matter more on a 13x6 than almost any other construction.
Glueless features
Many 13x6 wigs are now glueless, with combs, straps and an elastic band. That's the easiest way to wear them.
Density and weight
13x6 wigs are often sold in high densities — 200%, 250% and up — for a full, glamorous look. Remember that more hair is more weight on the cap and more hair to style around the parting. If you want natural rather than glam, 150–180% is the better match. See high density wigs and our density guide.
Cap size
Same advice as any lace wig: measure your head and check the listing offers a size that fits.
Fitting a 13x6
The process is the same as a 13x4. The one difference: because the lace runs deeper, make sure the cap underneath is smooth across the top of your head, not just at the hairline. A bump or a wrinkle four or five inches back can show through a deep part.
- Flatten your hair and use a cap close to your skin tone.
- Adjust the straps before fitting.
- Place the lace just in front of your hairline.
- Secure the combs.
- Trim and lay the lace, then use a melt band for 10–20 minutes.
- Style the part — use a fine-tooth comb to create a clean, slightly irregular parting line.
Our glueless fitting guide walks through each step.
Styling a 13x6
- Deep side part with a voluminous swoop — the signature 13x6 look.
- Zig-zag part — only convincing with deep lace.
- Middle part with sleek straight hair — shows a long, natural parting.
- Slicked-back front with a low ponytail — uses the extra lace for a natural transition.
- Half-up styles — pull the top section back to show the parting depth.
- Side-swept curls — on a curly 13x6, flip the curls to one side for volume.
Which retailers to look at
All the retailers we list sell lace fronts, and 13x6 appears across most of them. From the "Strongest on" measure on our comparison page:
- Zlike Hair leans toward full frontals more than other retailers.
- Amanda Hair leans toward heavy densities and 360/full-lace caps — useful if you want a full, glam 13x6.
- Luvme Hair leans toward HD lace.
None of that says one retailer's wigs are better; it says where they have more to choose from. Browse every 13x6 lace front wig together.
Care for the deeper lace
- Wash the parting gently. Diluted shampoo and fingertips along the part; never scrub.
- Keep heat away from the part. It's tempting to flat-iron right at the root for a sleek part — keep the iron moving and a little away from the lace.
- Vary the part occasionally to spread wear across the lace.
- Store on a stand so the deeper lace isn't creased.
13x6 questions
Is 13x6 harder to fit than 13x4?
No. The hairline you lay is the same length. The extra lace sits behind it.
Will a 13x6 look more natural than a 13x4?
With a middle part and hair falling forward, there's little visible difference. With a deep part, pulled-back styles or a lot of volume at the root, the 13x6 looks more natural further back.
Is a 13x6 heavier?
Not because of the lace — lace weighs almost nothing. Weight comes from density and length.
Should a first lace front be 13x6?
It can be, if you love deep parts. Otherwise a glueless 13x4 or 7x5 is a slightly simpler start at a slightly lower price.
Reading a 13x6 listing: a worked example
"13x6 HD Lace Front Wig Body Wave Glueless Pre-Plucked Bleached Knots 200% Density 24 Inch"
- 13x6 — ear-to-ear lace, six inches deep.
- HD Lace — the thinnest grade; worth it on a deep parting.
- Body Wave — flattering on a deep side part with volume.
- Glueless — combs, straps, usually an elastic band.
- Pre-Plucked and Bleached Knots — check that the parting area is plucked too, not just the hairline.
- 200% Density — full and glamorous; 13x6 units are often sold dense.
- 24 Inch — long; body wave hangs slightly shorter.
How to create a convincing deep side part
- Find where your natural part would fall — usually above the arch or outer corner of your eyebrow.
- Draw the part back toward the crown with a fine-tooth comb, staying on the lace.
- Lift the roots on the heavier side with a round brush for volume.
- Flip the hair over and let it fall in a swoop.
- Dab concealer along the part if knots show.
- Set it with a light hold spray.
With six inches of lace, the part looks like scalp almost all the way back.
13x6 for different face shapes
- Round face — a deep side part adds asymmetry and lengthens the face.
- Square face — a deep side part with soft waves softens the jaw.
- Long face — a middle part with volume at the sides works well.
- Heart-shaped face — a side part with a swoop across the forehead balances width.
Common 13x6 mistakes
- Buying it for a middle part only. A 13x4 does that for less.
- A dense, unplucked parting. The deep part puts it on show.
- Extreme density for daily wear. Heavy and hot.
- Flat-ironing at the root along the part. Scorches and sheds the lace.
- Assuming it allows a high ponytail. The back is still wefted.
13x6 and a wig wardrobe
A 13x6 makes an excellent "special" wig alongside a quicker everyday unit — a closure or 7x5 for weekdays, the 13x6 for weekends and events. See building a wig wardrobe.
More 13x6 questions
Is a 13x6 the same as a "deep part" wig?
Often, yes — retailers describe 13x6 lace fronts as deep part. Some "deep part" wigs are T-part designs with lace only down the middle; check the specification.
Does 13x6 lace take longer to wash?
Not really — but take care along the deeper part, washing gently with fingertips.
Can I cut a 13x6 into a bob?
Possible, but a bob built short usually looks better. See short wigs.
The short version
A 13x6 gives you the same ear-to-ear hairline as a 13x4 with two extra inches of lace behind it. That matters for deep side parts, switching parts, high-volume styles and being seen from above. It doesn't help with high ponytails, and it isn't harder to fit. Look for a plucked parting and bleached knots, and keep the density sensible unless you want full glam.
Browse every 13x6 lace front wig, compare it with 13x4 lace fronts and our 13x4 guide, and check today's coupon codes before you buy.
Browse what this covers
Now you know what to look for
Put it to work. Answer five quick questions about the look you want and how you'll wear it, and we'll match you to one wig — with the reasons why, so you can judge it for yourself.
Find my match →Or see every wig compared by lace, density and price — and before you pay, today's wig coupon codes.